4. Selecting Data

In this chapter we construct some programs that retrieve data from the database and stream it back, mapping to Scala types on the way. We also introduce YOLO mode for experimenting with doobie in the REPL.

Setting Up

First let’s get our imports out of the way and set up a Transactor as we did before. You can skip this step if you still have your REPL running from last chapter.

import doobie.imports._
import scalaz._, Scalaz._
import scalaz.concurrent.Task

val xa = DriverManagerTransactor[Task](
  "org.postgresql.Driver", "jdbc:postgresql:world", "postgres", ""
)

We will be playing with the country table, shown here for reference. If you don’t have the world database set up, go back to the Introduction for instructions.

CREATE TABLE country (
  code       character(3)  NOT NULL,
  name       text          NOT NULL,
  population integer       NOT NULL,
  gnp        numeric(10,2)
  -- more columns, but we won't use them here
)

Internal Streaming

For our first query let’s aim low and select some country names into a List, then print out the first few. There are several steps here so we have noted the types along the way.

scala> (sql"select name from country"
     |   .query[String]     // Query0[String]
     |   .list              // ConnectionIO[List[String]]
     |   .transact(xa)      // Task[List[String]]
     |   .unsafePerformSync // List[String]
     |   .take(5).foreach(println))
Afghanistan
Netherlands
Netherlands Antilles
Albania
Algeria

Let’s break this down a bit.

This is ok, but there’s not much point reading all the results from the database when we only want the first few rows. So let’s try a different approach.

scala> (sql"select name from country"
     |   .query[String]     // Query0[String]
     |   .process           // Process[ConnectionIO, String]
     |   .take(5)           // Process[ConnectionIO, String]
     |   .list              // ConnectionIO[List[String]]
     |   .transact(xa)      // Task[List[String]]
     |   .unsafePerformSync // List[String]
     |   .foreach(println))
Afghanistan
Netherlands
Netherlands Antilles
Albania
Algeria

The difference here is that process gives us a scalaz.stream.Process[ConnectionIO, String] which emits the results as they arrive from the database. By applying take(5) we instruct the process to shut everything down (and clean everything up) after five elements have been emitted. This is much more efficient than pulling all 239 rows and then throwing most of them away.

Of course a server-side LIMIT would be an even better way to do this (for databases that support it), but in cases where you need client-side filtering or other custom postprocessing, Process is a very general and powerful tool. For more information see the scalaz-stream repo, which has a good list of learning resources.

YOLO Mode

The API we have seen so far is ok, but it’s tiresome to keep saying transact(xa) and doing foreach(println) to see what the results look like. So just for REPL exploration there is a module of extra syntax provided on Transactor that you can import, and it gives you some shortcuts.

import xa.yolo._

We can now run our previous query in an abbreviated form.

scala> (sql"select name from country"
     |   .query[String] // Query0[String]
     |   .process       // Process[ConnectionIO, String]
     |   .take(5)       // Process[ConnectionIO, String]
     |   .quick         // Task[Unit]
     |   .run)
<console>:32: warning: method run in class Task is deprecated: use unsafePerformSync
         .run)
          ^
  Afghanistan
  Netherlands
  Netherlands Antilles
  Albania
  Algeria

This syntax allows you to quickly run a Query0[A] or Process[ConnectionIO, A] and see the results printed to the console. This isn’t a huge deal but it can save you some keystrokes when you’re just messing around.

Multi-Column Queries

We can select multiple columns, of course, and map them to a tuple. The gnp column in our table is nullable so we’ll select that one into an Option[Double]. In a later chapter we’ll see how to check the types to be sure they’re sensible.

scala> (sql"select code, name, population, gnp from country"
     |   .query[(String, String, Int, Option[Double])]
     |   .process.take(5).quick.run)
<console>:29: warning: method run in class Task is deprecated: use unsafePerformSync
         .process.take(5).quick.run)
                                ^
  (AFG,Afghanistan,22720000,Some(5976.0))
  (NLD,Netherlands,15864000,Some(371362.0))
  (ANT,Netherlands Antilles,217000,Some(1941.0))
  (ALB,Albania,3401200,Some(3205.0))
  (DZA,Algeria,31471000,Some(49982.0))

doobie automatically supports row mappings for atomic column types, as well as options, tuples, HLists, shapeless records, and case classes thereof. So let’s try the same query with an HList:

scala> import shapeless._
import shapeless._

scala> (sql"select code, name, population, gnp from country"
     |   .query[String :: String :: Int :: Option[Double] :: HNil]
     |   .process.take(5).quick.run)
<console>:32: warning: method run in class Task is deprecated: use unsafePerformSync
         .process.take(5).quick.run)
                                ^
  AFG :: Afghanistan :: 22720000 :: Some(5976.0) :: HNil
  NLD :: Netherlands :: 15864000 :: Some(371362.0) :: HNil
  ANT :: Netherlands Antilles :: 217000 :: Some(1941.0) :: HNil
  ALB :: Albania :: 3401200 :: Some(3205.0) :: HNil
  DZA :: Algeria :: 31471000 :: Some(49982.0) :: HNil

And with a shapeless record:

scala> import shapeless.record.Record
import shapeless.record.Record

scala> type Rec = Record.`'code -> String, 'name -> String, 'pop -> Int, 'gnp -> Option[Double]`.T
defined type alias Rec

scala> (sql"select code, name, population, gnp from country"
     |   .query[Rec]
     |   .process.take(5).quick.run)
<console>:34: warning: method run in class Task is deprecated: use unsafePerformSync
         .process.take(5).quick.run)
                                ^
  AFG :: Afghanistan :: 22720000 :: Some(5976.0) :: HNil
  NLD :: Netherlands :: 15864000 :: Some(371362.0) :: HNil
  ANT :: Netherlands Antilles :: 217000 :: Some(1941.0) :: HNil
  ALB :: Albania :: 3401200 :: Some(3205.0) :: HNil
  DZA :: Algeria :: 31471000 :: Some(49982.0) :: HNil

And again, mapping rows to a case class.

case class Country(code: String, name: String, pop: Int, gnp: Option[Double])
scala> (sql"select code, name, population, gnp from country"
     |   .query[Country] // Query0[Country]
     |   .process.take(5).quick.run)
<console>:35: warning: method run in class Task is deprecated: use unsafePerformSync
         .process.take(5).quick.run)
                                ^
  Country(AFG,Afghanistan,22720000,Some(5976.0))
  Country(NLD,Netherlands,15864000,Some(371362.0))
  Country(ANT,Netherlands Antilles,217000,Some(1941.0))
  Country(ALB,Albania,3401200,Some(3205.0))
  Country(DZA,Algeria,31471000,Some(49982.0))

You can also nest case classes, HLists, shapeless records, and/or tuples arbitrarily as long as the eventual members are of supported columns types. For instance, here we map the same set of columns to a tuple of two case classes:

case class Code(code: String)
case class Country(name: String, pop: Int, gnp: Option[Double])
scala> (sql"select code, name, population, gnp from country"
     |   .query[(Code, Country)] // Query0[(Code, Country)]
     |   .process.take(5).quick.run)
<console>:37: warning: method run in class Task is deprecated: use unsafePerformSync
         .process.take(5).quick.run)
                                ^
  (Code(AFG),Country(Afghanistan,22720000,Some(5976.0)))
  (Code(NLD),Country(Netherlands,15864000,Some(371362.0)))
  (Code(ANT),Country(Netherlands Antilles,217000,Some(1941.0)))
  (Code(ALB),Country(Albania,3401200,Some(3205.0)))
  (Code(DZA),Country(Algeria,31471000,Some(49982.0)))

And just for fun, since the Code values are constructed from the primary key, let’s turn the results into a Map. Trivial but useful.

scala> (sql"select code, name, population, gnp from country"
     |    .query[(Code, Country)] // Query0[(Code, Country)]
     |    .process.take(5)        // Process[ConnectionIO, (Code, Country)]
     |    .list                   // ConnectionIO[List[(Code, Country)]]
     |    .map(_.toMap)           // ConnectionIO[Map[Code, Country]]
     |    .quick.run)
<console>:40: warning: method run in class Task is deprecated: use unsafePerformSync
          .quick.run)
                 ^
  Map(Code(ANT) -> Country(Netherlands Antilles,217000,Some(1941.0)), Code(DZA) -> Country(Algeria,31471000,Some(49982.0)), Code(ALB) -> Country(Albania,3401200,Some(3205.0)), Code(NLD) -> Country(Netherlands,15864000,Some(371362.0)), Code(AFG) -> Country(Afghanistan,22720000,Some(5976.0)))

Final Streaming

In the examples above we construct a Process[ConnectionIO, A] and discharge it via .list (which is just shorthand for .runLog.map(_.toList)), yielding a ConnectionIO[List[A]] which eventually becomes a Task[List[A]]. So the construction and execution of the Process is entirely internal to the doobie program.

However in some cases a stream is what we want as our “top level” type. For example, http4s can use a Process[Task, A] directly as a response type, which could allow us to stream a resultset directly to the network socket. We can achieve this in doobie by calling transact directly on the Process[ConnectionIO, A].

scala> val p = {
     |   sql"select name, population, gnp from country"
     |     .query[Country]  // Query0[Country]
     |     .process         // Process[ConnectionIO, Country]
     |     .transact(xa)    // Process[Task, Country]
     |  }
p: scalaz.stream.Process[scalaz.concurrent.Task,Country] = Await(scalaz.concurrent.Task@5679dd65,<function1>,<function1>)

scala> p.take(5).runLog.run.foreach(println)
<console>:34: warning: method run in class Task is deprecated: use unsafePerformSync
       p.take(5).runLog.run.foreach(println)
                        ^
Country(Afghanistan,22720000,Some(5976.0))
Country(Netherlands,15864000,Some(371362.0))
Country(Netherlands Antilles,217000,Some(1941.0))
Country(Albania,3401200,Some(3205.0))
Country(Algeria,31471000,Some(49982.0))

Diving Deeper

The sql interpolator is sugar for constructors defined in the doobie.hi.connection module, aliased as HC if you use the standard imports. Using these constructors directly, the above program would look like this:


val sql = "select code, name, population, gnp from country"

val proc = HC.process[(Code, Country)](sql, ().point[PreparedStatementIO])

(proc.take(5)        // Process[ConnectionIO, (Code, Country)]
     .list           // ConnectionIO[List[(Code, Country)]]
     .map(_.toMap)   // ConnectionIO[Map[Code, Country]]
     .quick.run)

The process combinator is parameterized on the process element type and consumes a sql statement and a program in PreparedStatementIO that sets input parameters and any other pre-execution configuration. In this case the “prepare” program is a no-op.